[ad_1]
Not a problem with the power supply phases or some faulty track for the new ones ASRock socket AM5 motherboard there’s a inconvenience which concerns i adhesive residues. The Taiwanese company in a notein which he explains that some first samples of the new X670E and X670 motherboards feature a adhesive above the DDR5 memory slots which, when removed, it may leave residues potentially capable of prevent correct contact of the memories into the appropriate DIMM slots.
ASRock has clearly given up willing to replace the motherboard if necessary and announced that the problem will not recur in the future: only the first deliveries, in fact, have a sticker that warns of a duration of very long first starthitch solved with new BIOS.
The first revisions of BIOS for ASRock’s AM5 motherboards, in fact, they could take several minutes for the first boot, with different timing based on the installed memory capacity. With the later firmware ASRock and the technicians from AMD managed to reduce the timing and therefore the notice was no longer necessary.
So let’s say that the singular problem is now behind us, even if some samples may still be in circulation. Those who come across the offending adhesive can try to remove it carefully independently, perhaps by slightly heating the part to facilitate the detachment of the adhesive, or contact the shopkeeper from whom they purchased the motherboard for what to do.
For ASRock it is undoubtedly a slip, but also “all experience”: next time it will think twice to establish the positioning of any stickers.
.
[ad_2]
Source link
